Built-ToughIntroducing the HT1035 Hydraulic Weld-On Thumb by Gentec – built tough for contractors and landscapers. This 10" wide and 35" long thumb is designed for machines between 10,000lbs and 15,000lbs and weighs 187lbs. Constructed with 5/8"...

Built-ToughIntroducing the MT1035 Mechanical Weld-On Thumb, a reliable and robust solution designed to optimize your digging and material handling tasks. Measuring 10" wide by 35" long, this thumb is ideal for machines between 10,000lbs and 15,000lbs and...

FitmentMachine Weight Class: between 4,000 and 14,500 lbsA bolt-on headplate must be purchased separately to match your specific machine quick coupler.If your machine does not have a quick coupler, have a look at the GE870 compactor...

Fitment:Machine Weight Class: between 4,000 and 14,500 lbsStick width: Your machine's stick width should be less than or equal to 7.5 inches.Quick-coupler compatibility:Your machine does not have a quick coupler; ORYour machine has a pin-grabber style...

Built-ToughIntroducing the PT230 Hydraulic Pin-On Thumb by Gentec – built tough for contractors. Constructed with two 3/4" thick AR400 Steel Tines, and with gussets between each for reinforced strength, it's ready for any job. You provide the width, and...

Built-Tough Introducing the 24 inch digging bucket by Gentec, built tough for contractors. This bucket is designed for 4.0-5.9 ton machines and weighs 308 lbs. With a volume of 0.18 cubic yards, this bucket comes equipped with...

Built-Tough Introducing the 42 inch ditching bucket by Gentec, built tough for contractors. This bucket is designed for 4.0-5.9 ton machines and weighs 453 lbs. With a volume of 0.35 cubic yards, this bucket is equipped with a...

Built-Tough Introducing the 12 inch digging bucket by Gentec, built tough for contractors. This bucket is designed for 4.0-5.9 ton machines and weighs 198 lbs. With a volume of 0.09 cubic yards, this bucket comes equipped with...